Advancara™ Concept Drawings

Industrial-design studies · Two exterior sheets · the full set opens with Full Access · October 2026

The middle tier of the Caffevolve™ device line, drawn around what the Platform physically needs: a split hopper feeding the blend-then-grind stack, Flavor and Wellness canisters flanking the touchscreen, a carafe-size brew drawer, and a 60 oz insulated carafe. Concept design, illustrative — each licensee brings its own industrial design and engineering.

Overall (W × H × D)	11.5 × 17.9 × 13.0 in
Height, hoppers lifted off	15.0 in
Split hopper	One 9 in clear drum — Hopper A caffeinated, Hopper B decaf; each half lifts out
Additive canisters	Six: Flavor F-1 to F-3 (warm), Wellness W-1 to W-3 (cool); about 3 in deep
Touchscreen	About 4.5 in, on the upper face
Brew basket	About 6 in flat-bottom, in a front pull-out drawer
Carafe	60 oz vacuum-insulated, no warming plate
Water reservoir	84 oz, rear-mounted, lifts out or fills in place

Sheet 1, Front elevation, Advancara concept drawing — Sheet 1 of 4Front elevation. Split hopper over the grinder tower; three Flavor and three Wellness canisters flank the touchscreen; a carafe-size brew drawer sits above the 60 oz insulated carafe.

Sheet 3, Three-quarter view, Advancara concept drawing — Sheet 3 of 4Three-quarter view. A proportion study from the front right: one clear split hopper on the top deck, the stepped profile, and the clear rear reservoir.

Sheets 2 and 4

The side elevation with the internal component stack, and the additive dispense-path detail, are part of the Full Access edition of this set.